Evans Waterless Coolant for Classic Cars, No More Overheating! Protect Your Investment, Antifreeze .

This is a truly outstanding product that lasts a lifetime. Evans produce a range of waterless coolants for you vehicle, be it a Vintage, Classic or Performance car. Evans Cool 180º range protects engine cooling systems from -40ºC to 180ºC. The unique properties prevent many of the problems associated with waterbased coolants such as Corrosion and Overheating. Benefits: No Water - No Overheating Evans Cool 180º range has a boiling point of 180°C and will not boilover. No Water - No Corrosion Water contains oxygen, oxygen allows corrosion. Evans Cool 180º range eliminates corrosion. No Water - No Pressure Evans Cool 180º range allows your cooling system to run at a lower pressure, reducing the strain on engine components, especially hoses. No Water - No Liner Pitting Evans Cool 180º range generates significantly less pitting when compared with all water based coolants. No Water - More BHP Evans Cool 180º range eliminates premature detonation associated with overheating. More Details Evans Waterless Coolants completely replace the standard water and anti-freeze mix used in most cooling systems giving a vast amount of benefits. Being waterless the first advantages are obvious; Without water in the cooling system there is no longer any corrosion or lime scale build up prolonging the life of all the components as well as keeping the water ways and radiator unblocked meaning the cooling system remains efficient. Evans has an anti-freeze protection down to -40°C and a boiling point of 180°C. The much higher boiling point means that the overall system pressure is greatly reduced minimizing the strain on all of the components of your cooling system especially the water hoses. The high boiling point also increases the thermal efficiency of the coolant thus preventing hotspots from occurring. This reduces engine damage caused by pitting from localised boiling as well as stopping cavitation in the water pump. The higher thermal efficiency of the coolant means you can run the engine at a slightly higher temperature increasing both fuel economy and power as detonations due to overheating no longer occur. Evans is non-toxic and lasts a lifetime so reduces your servicing cost. In the event of an emergency Evans is completely compatible with water and K-Seal and can be topped up if necessary although the coolant will need changing once the leak is fixed. Why invest a fortune on your engine rebuild and the oils that you put in it to keep it in good health and then use water from the tap to cool it?? No water, no problems! Sold in 5 litre containers